Hydraulic Holeless: 4-5 stops

Through committed engineers and a passionate team of elevator field mechanics, Alliance Elevator Solutions (AES) has designed the most simplistic, field ready Inground hydraulic package ever offered to an independent elevator contractor. The ADVANTAGE™ Inground jacks are manufactured as a single piece or in multiple sections. A multipiece jack has cylinder and plunger sections that couple together using threaded couplings and an o-ring seal. This joint design eliminates the time and expense of field welding the sections together. With over 90 years of combined elevator experience Alliance is proud to offer this competitive ADVANTAGE™ to you.

Pit Depth 4'-0"
Car Speed Up To 150 FPM
Cab Height 8'-0"
A = Holtway Width
B = Hoistway Depth
C = Platform Width
D = Platform Depth
W = Door Width ( Clear )
P = Pit Depth ( Minimum 4'-0" )
O = Overhead: See below for OH requirements
Standard Cab Height = 8'-0"
Capacity (lbs.) Openings
F=Front
R=Rear
Hoistway Size
W(A) X D(B)
Platform Size
W(C) X D(D)
Clear Inside
W X D
Clear
Opening
Width
Door Types
SSSO SSCO 2SSO
PDFs CAD
2100 F 7'-6" X 5'-9" 6'-0" X 5'-1" 5'-8" X 4'-3" 3'-0" X SSSO (LH) SSSO (LH)
2100 F & R 7'-6" X 6'-8" 6'-0" X 5'-7½" 5'-8" X 4'-3½" 3'-0" X SSSO F&R SSSO F&R
2500 F 8'-6" X 5'-9" 7'-0" X 5'-1" 6'-8" X 4'-3" 3'-6" X SSCO
SSSO (LH)
SSCO
SSSO (LH)
2500 F & R 8'-6" X 6'-8" 7'-0" X 5'-7½" 6'-8" X 4'-3½" 3'-6" X SSSO F&R SSSO F&R
3000 F 8'-6" X 6'-2" 7'-0" X 5'-6" 6'-8" X 4'-8" 3'-6" X X SSCO
SSSO (LH)
SSCO
SSSO (LH)
3000 F & R 8'-6" X 6'-11" 7'-0" X 5'-10½" 6'-8" X 4'-6½" 3'-6" X X SSSO F&R SSSO F&R
3500 F 8'-6" X 6'-11" 7'-0" X 6'-3" 6'-8" X 5'-5" 3'-6" X X SSCO
SSSO (LH)
SSCO
SSSO (LH)
3500 F & R 8'-6" X 7'-8" 7'-0" X 6'-7½" 6'-8" X 5'-3½" 3'-6" X X SSSO F&R SSSO F&R
4000 F 7'-6" X 9'-2½" 6'-0" X 8'-5" 5'-8" X 7'-5" 4'-0" X 2SSO (LH) 2SSO (LH)
4000 F & R 7'-6" X 10'-4" 6'-0" X 9'-0½" 5'-8" X 7'-4½" 4'-0" X 2SSO F&R 2SSO F&R
4500 F 7'-8" X 9' 6½" 6'-0" X 8-9" 5'-8" X 7'-9" 4'-0" X 2SSO (LH) 2SSO (LH)
4500 F & R 7'-8" X 10' 9" 6'-0" X 9'-5½" 5'-8" X 7'-9½" 4'-0" X 2SSO F&R 2SSO F&R
  • Note 1: Running clearance between sill and platform is 1.25".
  • Note 2: Single speed doors sill depth 4". Two speed doors sill depth 5.5".
MAXIMUM INSIDE NET PLATFORM AREAS
To allow for variations in cab designs, an increase in the maximum inside net platform area not exceeding 5% shall be permitted for the various capacity loads.
Rated Capacity
(Lbs.)
Inside Net Area
(Sq. Ft.)
2100 24.2
2500 29.1
3000 33.7
3500 38.0
4000 42.2
4500 46.2
5000 50.0
APPROXIMATE CLEAR INSIDE DIMENSIONS OF CAB

Width = Platform Width less 4"

Depth = Front Open Only •SSSO & CO Doors = Platform Depth Less 10" • 2SSO Doors = Platform Depth less 12"

Depth = Front & Rear Open• SSSO & CO Doors = Platform Depth Less 16" • 2SSO Doors = Platform Depth less 20"

DBG (Distance Between Guides) = Platform Width plus 3 1/4" 15# rail depth= 3½"

RAIL BRACKET FASTENING TO HOISTWAY WALLS
Hoistway wall supports for rail bracket fastening are required per the layout drawing locations. For block or masonary walls, wall inserts must be installed in the walls by OTHER than the Elevator Contractor. Masonary block must be filled with mortar around Wall Inserts to provide a solid permanent rail bracket support. For wood and metal stud hoistway walls, covered with sheetrock, a suitable header support (running front-to-rear on each hoistway side wall) is required at each rail bracket location as per the rail force and location shown on the job specific layout drawing.

OVERHEAD REQUIRED QUICK CALCULATION
Regardless of what the travel is, the standard mimimum overhead is 12'-6". Consult your Alliance Elevator representative if your overhead is less than 12'-6".
© 2018 | Design, Hosting and Application Development by Delmarva Digital