Through committed engineers and a passionate team of elevator field mechanics, Alliance Elevator Solutions (AES) has designed the most simplistic, field ready two-stage telescopic hydraulic package ever offered to an independent elevator contractor. Alliance is proud to partner with I.T.I. HYDRAULIK for all of its two-stage telescopic jack needs. Two stage jack packages takes "ADVANTAGE" of the same time saving features, i.e. detailed work instructions, pit template, plug and play traveler, top of car harnesses and a pre-hung door operator as the single-stage holeless packages. With over 90 years of combined elevator experience Alliance is proud to offer this competitive ADVANTAGE™ to you.
Pit Depth 4'-0"
Car Speed Up To 150 FPM
Cab Height 8'-0"
A = Holtway Width W = Door Width ( Clear )
B = Holtway Depth P = Pit Depth ( Minimum 4'-0" )
B = Platform Width O = Overheard: See below for OH requirements
C = Platform Depth
OVERHEAD REQUIRED QUICK CALCULATION
Regardless of what the travel is, the standard mimimum overhead is 12'- 8". Consult your Alliance Elevator representative if your overhead is less than 12'-8".

MAXIMUM INSIDE NET PLATFORM AREAS
To allow for variations in cab designs, an increase in the maximum inside net platform area not exceeding 5% shall be permitted for the various capacity loads.

APPROXIMATE CLEAR INSIDE DIMENSIONS OF CAB
Rated Capacity (lbs.) Inside Net Area (Sq. Ft.)
2100 24.2
2500 29.1
3000 33.7
3500 38
4000 42.2
4500 46.2
5000 50
Width = Platform Width less 4"
Depth = Front Open Only •SSSO & CO Doors = Platform Depth Less 10" • 2SSO Doors = Platform Depth less 12"
Depth = Front & Rear Open • SSSO & CO Doors = Platform Depth Less 16" • 2SSO Doors = Platform Depth less 20"
BG (Distance Between Guides) Platform Width plus 3 1/4" 15# rail depth= 3½"
Platform Width plus 3 1/4" 15# rail depth= 3½"
Hoistway wall supports for rail bracket fastening are required per the layout drawing locations. For block or masonary walls, wall inserts must be installed in the walls by OTHER than the Elevator Contractor. Masonary block must be filled with mortar around Wall Inserts to provide a solid permanent rail bracket support. For wood and metal stud hoistway walls, covered with sheetrock, a suitable header support (running front-to-rear on each hoistway side wall) is required at each rail bracket location as per the rail force and location shown on the job specific layout drawing.



LOW CAPACITY STANDARD DIMENSION & SPECIFICATION CHART
Capacity (lbs.) Openings
F=Front
R=Rear
Hoistway Size
W(A) X D(B)
Platform Size
W(C) X D(D)
Clear Inside
W X D
Clear
Opening
Width
Door Types
SSSO SSCO 2SSO
PDFs CAD
2100 F 7'-4" X 5'-9" 6'-0" X 5'-1" 5'-8" X 4'-3" 3'-0" X SSSO (LH) SSSO (LH)
2100 F & R 7'-4" X 6'-8" 6'-0" X 5'-7½" 5'-8" X 4'-3½" 3'-0" X SSSO F&R SSSO F&R
2500 F 8'-4" X 5'-9" 7'-0" X 5'-1" 6'-8" X 4'-3" 3'-6" X SSCO
SSCO (LH)
SSCO
SSCO (LH)
2500 F & R 8'-4" X 6'-8" 7'-0" X 5'-7½" 6'-8" X 4'-3½" 3'-6" X SSSO F&R SSSO F&R
3000 F 8'-4" X 6'-2" 7'-0" X 5'-6" 6'-8" X 4'-8" 3'-6" X X SSCO
SSSO (LH)
SSCO
SSSO (LH)
3000 F & R 8'-4" X 6'-11" 7'-0" X 5'-10½" 6'-8" X 4'-6½" 3'-6" X X SSSO F&R SSSO F&R
3500 F 8'-4" X 6'-11" 7'-0" X 6'-3" 6'-8" X 5'-5" 3'-6" X X SSCO
SSSO (LH)
SSCO
SSSO (LH)
3500 F & R 8'-4" X 7'-8" 7'-0" X 6'-7½" 6'-8" X 5'-3½" 3'-6" X X SSSO F&R SSSO F&R
4000 F 7'-4" X 9'-2½" 6'-0" X 8'-5" 5'-8" X 7'-5" 4'-0" X 2SSO (LH) 2SSO (LH)
4000 F & R 7'-4" X 10'-4" 6'-0" X 9'-0½" 5'-8" X 7'-4½" 4'-0" X 2SSO F&R 2SSO F&R
4500 F 7'-6" X 9' 6½" 6'-0" X 8-9" 5'-8" X 7'-9" 4'-0" X 2SSO (LH) 2SSO (LH)
4500 F & R 7'-6" X 10' 9" 6'-0" X 9'-5½" 5'-8" X 7'-9½" 4'-0" X 2SSO F&R 2SSO F&R
  • Note 1: For holeless application above 24 ft please add 2" to the width of the hoistway.
  • Note 2: Running clearance between sill and platform is 1.25".
  • Note 3: Single speed doors sill depth 4". Two speed doors sill depth 5.5".

Want to stay connected?

© 2024 Alliance Elevator Solutions | Hosting and Application Development by Delmarva Digital